Summarize：The product use the imported formula and coating applied to high precision dies. It’s with uniform thickness, and similarity double film, and the bottom with release paper, usually it is solid without sticking. The film will melt after warming and stick fast until solid.
Film appearance: translucent and milky white
Specification: Thickness: 0.04mm-0.3mm Width: 7mm-1500mm Length: 100yards/roll
Thickness error: 0.005mm-0.01mm
Melting range: 110±5℃
Processing temperature : 120-180℃
Processing time: 5-20s
Bonding scope: PVC trademarks, screening material, Flocking ink, latex-computer-embroidery-badge and bonding drapery-trademark, handicraft articles, shoes &hats, textiles, Papers and aluminum flakes etc.
Washing performance: washing in 50℃, but that depend on fabrics, you should have an concrete experiment to confirm.
Substrate material: single silicone release paper
Packing: 1 roll/PE FILM, 100yards/roll, 2~4rolls/box or it's up on the customer's option.
Our hot melt adhesive film is the idealist environmentally-friendly adhesive material.
Film appearance | Translucent and milky white |
Substrate material | single silicone release paper |
Melting Range | 110 |
Processing temperature ( °C ) | 120-180 |
Processing time(seconds) | 5-20 |
Thickness (mm) | 0.04-0.3 |
Width(mm) | 7-1500mm |
Notes: Pressing temperature and time is just for your reference, it depends on pressing equipment, the thickness of bonding material, coefficient of thermal conductivity and pressure.
